The new deck is done!

For the last several weeks I have been building a new deck that wraps partway around the pool and comes up along the back of the house. It will allow us to step out of our new sliding glass door off our bedroom onto the deck. The top of the deck will match the floor level in the house. It took several piers embedded in footings at 32"cc and pressure treated 2x8's at 16"cc to support the weight of a future hot tub. Since framing is less than 10" clear from the ground I had to use pressure treated wood. I used chemical resistant screws, hangers, & angles to fasten the framing together.

I bought most of the hardware from the usual spot, Home Depot, but the wood and Trex decking were much less expensive at Berco Redwood. I used screws for everything, so there are no nails in this deck. I lost a week by buying the deck late on a Saturday so it couldn't be delivered until Monday. All I could do was move the decking to the back patio Monday night after work. Then look at it all week wishing I could start getting some of it down.

The first weekend attaching the decking was a cold one so I wasn't moving as fast as I would have liked. I was getting 5 rows of deck done a day. The following Saturday I finished the decking on the front side. Once I finish the far side I'll cut and attach the trim around the outside. The trim will cover the pressure treated wood still visible around the outside of the deck.

The framing is done and all I have left to do is finish attaching the decking (and cast a step on each side). I'll have additional progress photos posted soon. I've been using the film camera for most of the shots.